If you wanna print it yourself, the model is here: https://www.printables.com/model/1348194-4n-threaded-flat-head-screws-and-nuts-10-32-equiva

Design to be a drop in replacement for 10-32 screws with a much, much higher pitch. These screws are extremely easy to print, is reliable enough that it can hold some weight.

If you wanna print this yourself, you need to make sure that the screw is sideways, so if it breaks it’s no on the layer lines.

Using them in my own prints which had metal screws and they are holding quiet well.

    • @[email protected]OP
      link
      fedilink
      English
      63 days ago

      Anything with sharp angles will be likely strip it. Spanner Drive heads might do it, but it’s an uncommon type of screw bit.

      • @[email protected]
        link
        fedilink
        English
        43 days ago

        why limit yourself to current bits? design and print your own bit head that’s strong for printed parts.