If you wanna print it yourself, the model is here: https://www.printables.com/model/1348194-4n-threaded-flat-head-screws-and-nuts-10-32-equiva

Design to be a drop in replacement for 10-32 screws with a much, much higher pitch. These screws are extremely easy to print, is reliable enough that it can hold some weight.

If you wanna print this yourself, you need to make sure that the screw is sideways, so if it breaks it’s no on the layer lines.

Using them in my own prints which had metal screws and they are holding quiet well.

  • @[email protected]
    link
    fedilink
    English
    33 days ago

    Number series machine screws get their designations from wire gage sizes that they were made from. Which traces back to several different British thread systems waaayyy back in the day. While there is no hard and fast rule, the number series screws are sometimes referred to as ‘Machine screws’ while fractional series fasteners are referred to as ‘Bolts’. No one knows why, and Whitworth is dead. (Toolmaker humor).

    All actual diameters of screws are a bit under nominal for external and a bit over size nominal for internal. This is the clearance needed to make a screw and nut fit together. This all applies to metric thread fasteners also. Thread fit classes are a story for another day.

    • @[email protected]
      link
      fedilink
      English
      23 days ago

      I’m not sure if the wire gauge thing is right, unless you’re talking about a different system than I’m familiar with, because with wire gauge smaller number=bigger wire, and with screw sizes smaller number=smaller screw

      Also just my 2¢ on “machine screw” vs “bolt” as a casual tinkerer with various things held together by different types of threaded fasteners.

      Generally speaking if it’s got a hex head or nut that I’m using a wrench to tighten, it’s a bolt

      If it’s got some sort of hole (or God forbid a slot) that I’m going to use some sort of a driver (for the purposes of this, an Allen “wrench” is a driver) to tighten, it’s a screw.

      And of course everything gets really murky when we start talking about things like sheet metal screws, lag bolts/screws, masonry screws, etc.

      • Jón Fairbairn
        link
        fedilink
        33 days ago

        @Fondots @Bluewing especially since the terminology is different in different dialects of English. I think what you call lag bolts might be coach bolts over here.

        • @[email protected]
          link
          fedilink
          English
          12 days ago

          Lag bolts are more like a big wood screw, what you call coach bolts seem to be what we call carriage bolts